Mercruiser oils and lubricants, available by mail order. Mercruiser oils and lubricants should always be used in any Mercruiser inboard. Mercruiser oils are formulated to perform and protect your inboard and non-OEM oil should never be used. We have seen too many engines fail because the wrong oils were used.
Genuine Mercruiser Oils and Lubricants are made to exacting standards to withstand the harsh saltwater environment in which marine engines operate. They are not expensive and all Quicksilver products perform well in harsh saltwater environments. Why risk you or your family or your engine out at sea by using non-OEM parts?
Quicksilver Corrosion Guard is used to spray over the complete inboard or outboard engine block and the external electric connections and painted surfaces to prevent corrosion and rust during the winter and whilst in storage.
Quicksilver Power Tune is a blend of solvents and oil designed for combustion chamber deposit removal. Gum, varnish and deposits are softened and removed through the chemical action of this Quicksilver formulation through the fuel system and combustion chambers.
Quicksilver Storage Seal Fogging Oil is a blend of corrosion inhibiting additives designed to coat internal engine components during engine storage and reduce the formation of surface rust.
Quicksilver Power Trim and Steering Fluid, designed as a universal hydraulic fluid designed to mix with all hydraulic fluids. For power tilt and trim and power steering applications.
Designed to mix with all hydraulic fluids, it protects seals and hoses. Quicksilver Power Trim and Steering Fluid also prevent foaming, oxidation and corrosion. For use in power trim and steering systems. It is also suitable for high-temperature applications.
Quicksilver High-Performance Gear Lube contains improved emulsifiers to help protect gears should water enter the gear housing and tackifiers to improve oil film adhesion to gears and internal components.
Quicksilver High-Performance gear lube with pump applicator. This gear lube kit comes with a pump to re-fill an outboard or Sterndrive leg. High-Performance gear lube is refilled from the bottom up on all legs.
This adapter converts from 3/8" thread on the lube pump to 8mm on the gear housing for Japanese based outboards.
The Mercruiser and Mariner/Mercury oil drain pump attaches to the threaded fitting on the top of the dipstick and pumps oil from the engine crankcase.
Quicksilver 2-4-C Marine Lubricant with a cartridge gun. Quicksilver 2-4-C is a high-quality multi-purpose lubricant designed to withstand extreme friction and also provide added water resistance.
Quicksilver 2-4-C marine grease is a multi-purpose lubricant that withstands extreme friction and won’t break down when mixed with water.