Saildrive shaft service kit.
This Saildrive service kit includes the following parts required to service and repair the lower unit on an S130 and S150 Saildrive. Any Saildrive should be drained of oil and serviced every autumn, to ensure no emulsified oil is present within the gearbox. The seals don't last forever and can be damaged by a stray fishing line if wrapped or trapped behind the propeller. Check for deep ridges on the shaft, around the area where the oil seals sit. If too deep, the shaft may need to be replaced to ensure an oil/ water seal is maintained.
Genuine parts included:
Bearing carrier oil seals x 2, Part Number 3593663
Bearing carrier O-rings x 2, Part Number 889672
Genuine replacement drain plug screw, Part Number 3854539
Genuine drain plug o-ring, Part Number 3855081
Volvo Penta Part No: SD130150
For Saildrives: 130S, 150S
The 130S Saildrive uses approximately 3 to 3.35 litres of VDS3 oil. (not included)
The 150S Saildrive uses approximately 3.25 litres of VDS3 oil. (not included)
