MD2010 models and varients

Picture for category TYPE-Volvo Penta MD2010 Series

Technical Specification: MD2010 series compact diesel range.
Three-cylinder diesel
10 hp at 3600 r.p.m.
Oil capacity, 1.8 litres of VDS 4.5 oil
Coolant capacity: 2.3 litres plus calorifier

The MD2010A, MD2010B, MD2010C, MD2010D diesel was made between 1993 and 2005. All are basically the same. 

We can supply all parts for the Volvo Penta The MD2010 range including the range of MD2010 series spare parts, oil filters and fuel filters, crankcase breathers, drive belts and impellers, genuine MD2010 series exhaust elbows, oils and grease. We are also the main Volvo Penta dealer for servicing and technical support in Cornwall.

Volvo Penta MD2010 genuine service parts are made to exacting standards to withstand the harsh saltwater environment in which marine diesel engines operate. If you need help with any technical issue regarding your Volvo Penta MD2010, please call us.

The heat exchanger on any MD2010 should be cleaned every 5 years to prevent overheating. The MD2010 should run on Volvo green coolant. Mixing VCS yellow and green coolant can cause gelling and blockages within the cooling system.

The other part to check is the exhaust elbow. As a guide, the exhaust elbow, 861906 should be removed every few years, checked for blockages, and replaced every 8 to 10 years, as the outer water jacket of the exhaust can build up with rust and corrosion. 

back to top