Volvo Penta 120S-E Saildrive Parts
We support the Volvo Penta 120S-E Saildrive with genuine spare parts, Volvo Penta anodes, oil, and seals plus Saildrive paint to protect the 120S-E Saildrive from corrosion. Always fit genuine anodes to your 120S Saildrive to protect it from corrosion. Volvo Penta 120S anodes are made to exact specifications to protect the Saildrive.
Aluminium anodes should be used in brackish and saltwater. A Magnesium version should be used for freshwater. Anodes should not be mixed on any installation and should be inspected as often as possible, especially if the boat is in a marina environment with shore power around. If the anode is worn by more than a third, it will need to be changed, due to its surface area being reduced.
A Volvo Penta 120S-E differs from other variants as it uses Volvo Penta Synthetic Transmission Oil, SAE 75W-90 and not engine oil. Always use genuine Volvo Penta 120S anodes to ensure maximum protection on a 120S-E Saildrive. We also supply Volvo Penta 120S Saildrive fixed and folding propellers and the HydroAxe rope cutter, which can be installed on any fixed or folding propeller without alteration. We can help you with sizing a new propeller if required.
Click here for details on the HydroAxe rotating rope cutter for 120, MS25, 130 and 150 Saildrives.
Oil capacity: Approximately 2.6 litres of VDS 4.5 oil.
Volvo Penta Saildrive drain plug, Part Number 852904
£38.02
All prices in the UK include VAT
This is a replacement genuine Saildrive drain plug on some MS25S and 120S-E Saildrives.
Volvo Penta Sterndrive/ Saildrive drain plug, Part Number 3854539
£21.71
All prices in the UK include VAT
This is the magnetic Saildrive or Sterndrive drain plug. The washer for this drain plug is part number 3855081.
Volvo Penta drain plug O-Ring, Part Number 3855081
£1.68
All prices in the UK include VAT
This is a Saildrive/ Sterndrive drain plug O-ring and an oil filler O-ring on a DP-G sterndrive.
Volvo Penta Cone Kit for Saildrive, Part Number 23749222
£98.50
All prices in the UK include VAT
Genuine 2 and 3 bladed fixed propeller cone kit for a Volvo Penta Saildrive using a new style (current) fixed prop that doesn't now use a plastic washer. This kit contains the cone and bolt for the current style propeller. You cannot use an old-style cone that uses a plastic washer with the current propeller design.
Volvo Penta Saildrive cone bolt, Part Number 967519
£8.10
All prices in the UK include VAT
Saildrive cone bolt for new style plastic cone that does not use a white plastic spacer washer nor a tab washer.
Volvo Penta Saildrive cone bolt, Part Number 23748333
£10.48
All prices in the UK include VAT
Saildrive cone bolt for new style plastic cone that uses a tab washer but does not use a white plastic spacer washer.
Volvo Penta fixed propeller Saildrive plastic cone tab washer, Part Number 23680979
£11.02
All prices in the UK include VAT
This tab washer is used on some 2 and 3 blade fixed propeller cones using a tab washer. Volvo Penta Part Number: 23680979. This is the lock washer where the tabs are bent to secure the hub bolt.
Volvo Penta cone plastic washer, Part Number 850888
£10.15
All prices in the UK include VAT
Volvo Penta Saildrive and Outdrive cone plastic washer
Volvo Penta folding propeller Saildrive hub lock washer, Part Number 3851994
£5.62
All prices in the UK include VAT
This is a genuine tab lock washer for all Volvo Penta folding propellers on a Saildrive hub kit. Volvo Penta Part Number 3851994. This is the lock washer where the tabs are bent to secure the hub bolt.
Volvo Penta folding propeller Saildrive hub nut, Part Number 3584466
£57.08
All prices in the UK include VAT
Genuine Saildrive hub nut for Volvo Penta 2, 3 and 4 bladed folding propeller hubs as shown as item 4 on the picture, for a Saildrive
Volvo Penta folding propeller Saildrive hub bolt, Part Number 946730
£2.27
All prices in the UK include VAT
Hub bolt for Volvo Penta 2, 3 and 4 bladed folding bronze hubs fitted to a Saildrive.
Volvo Penta 2, 3 and 4 blade folding hub screw, Part Number 3581246
£1.94
All prices in the UK include VAT
Folding hub screw used on a 2 blade folding hub mounted on a shaft. Two are required.