![]()
We support the Volvo Penta 120S-E Saildrive with genuine spare parts, Volvo Penta anodes, oil, and seals plus Saildrive paint to protect the 120S-E Saildrive from corrosion. Always fit genuine anodes to your 120S Saildrive to protect it from corrosion. Volvo Penta 120S anodes are made to exact specifications to protect the Saildrive.
Aluminium anodes should be used in brackish and saltwater. A Magnesium version should be used for freshwater. Anodes should not be mixed on any installation and should be inspected as often as possible, especially if the boat is in a marina environment with shore power around. If the anode is worn by more than a third, it will need to be changed, due to its surface area being reduced.
A Volvo Penta 120S-E differs from other variants as it uses Volvo Penta Synthetic Transmission Oil, SAE 75W-90 and not engine oil. Always use genuine Volvo Penta 120S anodes to ensure maximum protection on a 120S-E Saildrive. We also supply Volvo Penta 120S Saildrive fixed and folding propellers and the HydroAxe rope cutter, which can be installed on any fixed or folding propeller without alteration. We can help you with sizing a new propeller if required.
Click here for details on the HydroAxe rotating rope cutter for 120, MS25, 130 and 150 Saildrives.
Oil capacity: Approximately 2.6 litres of VDS 4.5 oil.
All prices in the UK include VAT
The HydroAxe 3-blade rope cutter for the 120 and MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 and MS25 Volvo Penta Saildrive.
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
All prices in the UK include VAT
Volvo Penta Synthetic Transmission Oil, 20 litres, SAE 75W-90, Part Number 24809443
All prices in the UK include VAT
Volvo Penta Clamping Ring for 110S, 120S, 130S, 150S and MS25S Saildrive. This is the Saildrive clamping ring above the diaphragm.
All prices in the UK include VAT
Saildrive rubber diaphragm seal kit for 110S, 120S, 130S, 150S and MS25S Saildrive. Volvo Penta recommends that replacement of the Saildrive diaphragm seal is carried out every seven years as a minimum.
All prices in the UK include VAT
Volvo Penta Bearing Carrier, Part Number 873127. Ensuring you order the correct Saildrive bearing carrier for your Saildrive can be complicated. Please call us before ordering, with a serial number if possible. This can be found by the dipstick, on top of the Saildrive.
All prices in the UK include VAT
Volvo Penta Synthetic Transmission Oil, SAE 75W-90. Used in many Sterndrives. See our downloads section for the lubrication chart.
All prices in the UK include VAT
Saildrive exterior hull cover plate bellow for Volvo Penta and Yanmar Saildrives
All prices in the UK include VAT
Genuine 2 and 3 bladed fixed propeller cone kit for a Volvo Penta Saildrive using a new style (current) fixed prop that doesn't now use a plastic washer. This kit contains the cone and bolt for the current style propeller. You cannot use an old-style cone that uses a plastic washer with the current propeller design.
All prices in the UK include VAT
A Saildrive fish-line cutter is used on certain Saildrives including 120SB, Series 852700 120S-C, Series 853657, some 120S-D, some 120S-E.
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 or MSD25 Volvo Penta Saildrive.
All prices in the UK include VAT
HydroAxe replacement Zinc Saildrive rope cutter anode for a Volvo Penta 120 or MS25S Saildrive.