Volvo Penta 120S-E Service Parts
We support the Volvo Penta 120S-E Saildrive with genuine spare parts, Volvo Penta anodes, oil, and seals plus Saildrive paint to protect the 120S-E Saildrive from corrosion. Always fit genuine anodes to your 120S Saildrive to protect it from corrosion. Volvo Penta 120S anodes are made to exact specifications to protect the Saildrive.
Aluminium anodes should be used in brackish and saltwater. A Magnesium version should be used for freshwater. Anodes should not be mixed on any installation and should be inspected as often as possible, especially if the boat is in a marina environment with shore power around. If the anode is worn by more than a third, it will need to be changed, due to its surface area being reduced.
A Volvo Penta 120S-E differs from other variants as it uses Volvo Penta Synthetic Transmission Oil, SAE 75W-90 and not engine oil. Always use genuine Volvo Penta 120S anodes to ensure maximum protection on a 120S-E Saildrive. We also supply Volvo Penta 120S Saildrive fixed and folding propellers and the HydroAxe rope cutter, which can be installed on any fixed or folding propeller without alteration. We can help you with sizing a new propeller if required.
Click here for details on the HydroAxe rotating rope cutter for 120, MS25, 130 and 150 Saildrives.
Oil capacity: Approximately 2.6 litres of VDS 4.5 oil.
Volvo Penta 3 and 4 blade folding hub hex screw, Part Number 963695
£2.48
All prices in the UK include VAT
Folding hub hex screw used on a 3 or 4 blade folding hub mounted on a Saildrive or shaft. Three or four are required dependant on the number of blades present.
Volvo Penta 2 blade folding hub hex screw, Part Number 3595221
£18.47
All prices in the UK include VAT
Folding hub hex screw used on 2 blade folding hubs. Two are required.
Volvo Penta 3 part Aluminium anode for 2 and 3 blade folding hub, Part Number 23974203
£47.95
All prices in the UK include VAT
This three-segment folding hub anode should be checked regularly to ensure the propeller is protected from corrosion.
Volvo Penta 3 part Magnesium Anode for 2 and 3 blade folding hub, Part Number 3858400
£84.35
All prices in the UK include VAT
The 3 part folding hub anode 3858400 should be checked regularly to ensure the propeller is protected from corrosion.
Volvo Penta aluminium anode hub kit for 4 blade hub, Part Number 23974205
£42.66
All prices in the UK include VAT
The hub anode needs to be changed every year to protect the folding propeller from corrosion, especially if the yacht is kept in a marina.
Volvo Penta Magnesium Anode Kit for 4 Blade Folding Hub, Part Number 3584443
£91.69
All prices in the UK include VAT
Magnesium Anode set for a 4 bladed folding prop fitted to a Saildrive or Shaft
Saildrive prop shaft sealing ring, Part Number 3593663
£37.26
All prices in the UK include VAT
Saildrive prop shaft sealing rings that sit behind the prop and protects the gearbox from water ingression. Two are required.
Saildrive prop shaft bearing housing O-Ring, Part Number 925256
£7.34
All prices in the UK include VAT
These are the 2 O-rings that sit behind the prop and protect the gearbox from water ingress. Two are required.
Volvo Penta Saildrive shaft spacer, Part Number 3582887
£41.90
All prices in the UK include VAT
Saildrive shaft spacer. This is the spacer used behind the propeller on some of the following Saildrives: 130, 150, 120 S-A, 120 S-B, 120 S-D, 120 S-E, MS25 S-A, MS25 SR-A. The other option is the fish line cutter, part number 851984
Volvo Penta Bearing Carrier, Part Number 873127
£240.84
All prices in the UK include VAT
Volvo Penta Bearing Carrier, Part Number 873127. Ensuring you order the correct Saildrive bearing carrier for your Saildrive can be complicated. Please call us before ordering, with a serial number if possible. This can be found by the dipstick, on top of the Saildrive.
Volvo Penta Saildrive fish line cutter, Part Number 851984
£90.72
All prices in the UK include VAT
A Saildrive fish-line cutter is used on certain Saildrives including 120SB, Series 852700 120S-C, Series 853657, some 120S-D, some 120S-E.
HydroAxe rope cutter for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop
£692.00
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.