Volvo Penta 120S Service Parts
We support the Volvo Penta 120S Saildrive with genuine spare parts, Volvo Penta anodes, oil, and seals plus Saildrive paint to protect the 120S Saildrive from corrosion. Always fit genuine anodes to your 120S Saildrive to protect it from corrosion. Volvo Penta 120S anodes are made to exact specifications to protect the Saildrive.
Aluminium anodes should be used in brackish and saltwater. A Magnesium version should be used for freshwater. Anodes should not be mixed on any installation and should be inspected as often as possible, especially if the boat is in a marina environment with shore power around. If the anode is worn by more than a third, it will need to be changed, due to its surface area being reduced.
All 120S Saildrives, except the 120S-E version, use approximately 2.6 litres of VDS 4.5 engine oil. We also supply Volvo Penta 120S Saildrive fixed and folding propellers and the HydroAxe rope cutter which requires no propeller alteration. We can also help you with sizing a replacement propeller if required.
Click here for details on the HydroAxe rotating rope cutter for 120, MS25, 130 and 150 Saildrives.
Oil capacity: Approximately 2.6 litres of VDS 4.5 oil.
HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop
HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop. This is required to install a HydroAxe to a 120 or MS25 Saildrive when used in conjunction with a 2-bladed prop.
£54.00
All prices in the UK include VAT
HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop. This is required to install a HydroAxe to a 120 or MS25 Saildrive when used in conjunction with a 2-bladed prop.
HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 3-bladed prop
HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 3-bladed prop. This is required to install a HydroAxe to a 120 or MS25 Saildrive when used in conjunction with a 3-bladed prop.
£54.00
All prices in the UK include VAT
HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 3-bladed prop. This is required to install a HydroAxe to a 120 or MS25 Saildrive when used in conjunction with a 3-bladed prop.
HydroAxe replacement aluminium anode for a Volvo Penta 120 or MSD25 Saildrive
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 or MSD25 Volvo Penta Saildrive.
£70.00
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 or MSD25 Volvo Penta Saildrive.
HydroAxe replacement Zinc anode for a Volvo Penta 120 or MSD25 Saildrive
HydroAxe replacement Zinc Saildrive rope cutter anode for a Volvo Penta 120 or MS25S Saildrive.
£70.00
All prices in the UK include VAT
HydroAxe replacement Zinc Saildrive rope cutter anode for a Volvo Penta 120 or MS25S Saildrive.
HydroAxe rope cutter for a Volvo Penta 120 and MS25 Saildrive using a 3-bladed prop
The HydroAxe 3-blade rope cutter for the 120 and MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 and MS25 Volvo Penta Saildrive.
£776.40
All prices in the UK include VAT
The HydroAxe 3-blade rope cutter for the 120 and MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 and MS25 Volvo Penta Saildrive.
HydroAxe rope cutter for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
£716.40
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
Saildrive prop shaft bearing housing O-Ring, Part Number 925256
These are the 2 O-rings that sit behind the prop and protect the gearbox from water ingress. Two are required.
£7.78
All prices in the UK include VAT
These are the 2 O-rings that sit behind the prop and protect the gearbox from water ingress. Two are required.
Saildrive prop shaft sealing ring, Part Number 3593663
Saildrive prop shaft sealing rings that sit behind the prop and protects the gearbox from water ingression. Two are required.
£38.56
All prices in the UK include VAT
Saildrive prop shaft sealing rings that sit behind the prop and protects the gearbox from water ingression. Two are required.
Volvo Penta 2 blade folding hub hex screw, Part Number 3595221
Folding hub hex screw used on 2 blade folding hubs. Two are required.
£19.55
All prices in the UK include VAT
Folding hub hex screw used on 2 blade folding hubs. Two are required.
Volvo Penta 2, 3 and 4 blade folding hub screw, Part Number 3581246
Folding hub screw used on a 2 blade folding hub mounted on a shaft. Two are required.
£2.05
All prices in the UK include VAT
Folding hub screw used on a 2 blade folding hub mounted on a shaft. Two are required.
Volvo Penta 3 and 4 blade folding hub hex screw, Part Number 963695
Folding hub hex screw used on a 3 or 4 blade folding hub mounted on a Saildrive or shaft. Three or four are required dependant on the number of blades present.
£2.59
All prices in the UK include VAT
Folding hub hex screw used on a 3 or 4 blade folding hub mounted on a Saildrive or shaft. Three or four are required dependant on the number of blades present.
Volvo Penta 3 part Aluminium anode for 2 and 3 blade folding hub, Part Number 23974203
This three-segment folding hub anode should be checked regularly to ensure the propeller is protected from corrosion.
£48.17
All prices in the UK include VAT
This three-segment folding hub anode should be checked regularly to ensure the propeller is protected from corrosion.