Volvo Penta 150S Service Parts
We support the Volvo Penta 150S Saildrive with genuine spare parts, Volvo anodes, oil, and seals plus Saildrive paint to protect the 150S Saildrive from corrosion. Always fit genuine anodes to your 150S Saildrive to protect it from corrosion. Volvo Penta 150S anodes are made to exact specifications to protect the Saildrive.
Aluminium anodes should be used in brackish or saltwater use. A Magnesium version should be used for freshwater. Anodes should not be mixed on any installation and should be inspected as often as possible, especially if the boat is in a marina environment with shore power around. If the anode is worn by more than a third, it will need to be changed, due to its surface area being reduced.
Most 150S Saildrives use VDS 4.5 engine oil. We also supply Volvo Penta 150S Saildrive fixed and folding propellers and the HydroAxe rope cutter which requires no propeller alteration. We can also help you with sizing a replacement propeller if required.
Click here for details on the HydroAxe rotating rope cutter for 130 and 150 Saildrives.
Oil capacity: Approximately 3.25 litres of VDS 4.5 oil.
Volvo Penta aluminium anode hub kit for 4 blade hub, Part Number 23974205
£42.66
All prices in the UK include VAT
The hub anode needs to be changed every year to protect the folding propeller from corrosion, especially if the yacht is kept in a marina.
Volvo Penta Magnesium Anode Kit for 4 Blade Folding Hub, Part Number 3584443
£91.69
All prices in the UK include VAT
Magnesium Anode set for a 4 bladed folding prop fitted to a Saildrive or Shaft
Saildrive prop shaft sealing ring, Part Number 3593663
£37.26
All prices in the UK include VAT
Saildrive prop shaft sealing rings that sit behind the prop and protects the gearbox from water ingression. Two are required.
Saildrive 130 150 bearing housing O-ring, Part Number 889672
£2.27
All prices in the UK include VAT
These are the 2 O-rings that sit behind the prop and protect the gearbox from water ingress. Two are required.
Saildrive Lower Gear Unit Service kit, Part Number SD130150
£100.00
All prices in the UK include VAT
130S, 150S lower Saildrive shaft service kit to include the 2 shaft seals in the bearing carrier and the 2 bearing carrier O-rings, that protect the gearbox from water ingression. This kit also includes a genuine replacement drain plug and a new drain plug o-ring.
Volvo Penta Saildrive shaft spacer, Part Number 3582887
£41.90
All prices in the UK include VAT
Saildrive shaft spacer. This is the spacer used behind the propeller on some of the following Saildrives: 130, 150, 120 S-A, 120 S-B, 120 S-D, 120 S-E, MS25 S-A, MS25 SR-A. The other option is the fish line cutter, part number 851984
HydroAxe rope cutter for a Volvo Penta 130 or 150 Saildrive using a 2-bladed propeller
£723.00
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 130/ 150S Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
HydroAxe rope cutter for a Volvo Penta 130 or 150 Saildrive using a 3-bladed prop
£788.00
All prices in the UK include VAT
The HydroAxe 3-blade rope cutter for the 130/ 150S Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
HydroAxe replacement aluminium anode for a Volvo Penta 130 or 150 Saildrive
£70.00
All prices in the UK include VAT
HydroAxe replacement aluminium anode for a Volvo Penta 130 or 150 Saildrive.
HydroAxe replacement Zinc anode for a Volvo Penta 130 or 150 Saildrive
£70.00
All prices in the UK include VAT
HydroAxe replacement Zinc anode for a Volvo Penta 130 or 150 Saildrive.
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 2-bladed prop
£54.00
All prices in the UK include VAT
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 2-bladed prop. This is required to install a HydroAxe to a 130 or 150 Saildrive when used in conjunction with a 2-bladed prop.
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 3-bladed prop
£54.00
All prices in the UK include VAT
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 3-bladed prop. This is required to install a HydroAxe to a 130 or 150 Saildrive when used in conjunction with a 3-bladed prop.