Volvo Penta 2 blade folding blade kits for folding propellers
Genuine Volvo Penta 2 blade kits fit onto the hub kit to complete a 2 blade folding prop installation. A Volvo Penta prop is designed specifically to improve speed and reduce drag significantly. A folding prop can increase performance by up to 1.5 knots whilst under sail and stop the shaft or Saildrive from turning, under sail.
The Volvo Penta folding propeller comes in 2 parts. First, choose the correct hub kit for your shaft or Saildrive, and secondly choose the correct blade kit for your yachts length, displacement engine hp and gearbox ratio.
The correct propeller is vital to get the most out of your engine and boat. The power range for the 2-blade propeller is 5-40 HP and it is available in 15 sizes ranging from 14 x 7 to 19 x 13 pitch.
If you need help in sizing your propeller, please call us first. As a general rule, the power range for the 2-blade propeller is 5-40 HP, the 3-blade propeller is 25-60 HP and the 4-blade propeller is 55-120 HP.
Typically, to give an example of efficiency, a folding propeller will reduce a Chanel crossing by 4- 5 hours.
Please note all Volvo Penta Props are referred to as folding propellers. It is not recommended to install a feathering type propeller onto any Saildrive installation. All propellers are sent via Fed Ex or UPS and will need to be signed for. If you want to buy a new folding prop, please call us for help and advice.
Volvo Penta 2 blade folding hub hex screw, Part Number 3595221
£18.47
All prices in the UK include VAT
Folding hub hex screw used on 2 blade folding hubs. Two are required.
Volvo Penta 2, 3 and 4 blade folding hub screw, Part Number 3581246
£1.94
All prices in the UK include VAT
Folding hub screw used on a 2 blade folding hub mounted on a shaft. Two are required.
HydroAxe rope cutter for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop
£692.00
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
HydroAxe rope cutter for a Volvo Penta 130 or 150 Saildrive using a 2-bladed prop
£723.00
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 130/ 150S Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
HydroAxe replacement aluminium anode for a Volvo Penta 120 or MSD25 Saildrive
£70.00
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 or MSD25 Volvo Penta Saildrive.
HydroAxe replacement Zinc anode for a Volvo Penta 120 or MSD25 Saildrive
£70.00
All prices in the UK include VAT
HydroAxe replacement Zinc Saildrive rope cutter anode for a Volvo Penta 120 or MS25S Saildrive.
HydroAxe replacement aluminium anode for a Volvo Penta 130 or 150 Saildrive
£70.00
All prices in the UK include VAT
HydroAxe replacement aluminium anode for a Volvo Penta 130 or 150 Saildrive.
HydroAxe replacement Zinc anode for a Volvo Penta 130 or 150 Saildrive
£70.00
All prices in the UK include VAT
HydroAxe replacement Zinc anode for a Volvo Penta 130 or 150 Saildrive.
HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop
£54.00
All prices in the UK include VAT
HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop. This is required to install a HydroAxe to a 120 or MS25 Saildrive when used in conjunction with a 2-bladed prop.
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 2-bladed prop
£54.00
All prices in the UK include VAT
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 2-bladed prop. This is required to install a HydroAxe to a 130 or 150 Saildrive when used in conjunction with a 2-bladed prop.