Volvo Penta exhaust elbows are specifically designed and specified by Volvo Penta for the following diesels: D1-13, D1-20, D1-30, D2-40, D2-50, D2-55, D2-60 and D2-75 yacht series diesel engines, MD2010, MD2020, MD2030, MD2040, 2001, 2002, 2003, TAMD and KAD series
Genuine Volvo exhaust elbows are made to Volvo Penta's design and specification to ensure safe and correct cooling out at sea. We supply genuine Volvo Penta parts both to UK customers and to Volvo Penta owners abroad.
It is important that owners check the exhaust elbow, for carbon build-up and rust within the water jacket portion. If the engine has been run for long periods at very low revs, or at idle, Carbon can build up and block the exhaust causing breathing and starting issues. Rust can block the water jacket within the exhaust elbow, and restrict flow to the transom. This can cause overheating or the engine to ingest water and hydraulic. This can often be terminal.
Exhausts should be removed and checked to determine their condition. On average, a genuine exhaust should last about 6 to 10 years. If in doubt, our advice is to check or change it. Remember to buy a gasket when removing any exhaust.
If you need advice on Volvo Penta exhausts, please call us on 01326 370060
Genuine Volvo Penta Compact D1 Series, D2 Series and MD2010, MD2020, MD2030, MD2040 Series Exhaust Elbow
This is the exhaust elbow gasket for part number 861906 normal exhaust version and 3884165 (high riser version)
Genuine Volvo Penta Compact D1 Series, D2 Series and MD2010, MD2020, MD2030, MD2040 Series high riser exhaust elbow
Genuine Volvo Penta D2-55, D2-50, D2-60 and MD22 Exhaust Elbow, Part Number 21424345
This is the exhaust elbow or water injection elbow gasket for a 2001, 2002, 2003 or 2003T turbo, MD7, MD6.