![]()
Technical Specification: MD2010-D series compact diesel range.
Two-cylinder diesel
10 hp at 3600 r.p.m.
Oil capacity: 1.8 litres of VDS 4.5 oil
Coolant capacity: 2.3 litres plus calorifier amount
The MD2010D diesel was made between 2000 and 2005.
We can supply all parts for the Volvo Penta MD2010-D range, including MD2010-D series oil filters and fuel filters, crankcase breathers, drive belts and impellers, genuine MD2010-D series exhaust elbows, oils and grease. We are also the main Volvo Penta dealer for servicing and technical support in Cornwall.
Volvo Penta MD2010-D genuine service parts are made to exacting standards to withstand the harsh saltwater environment in which marine diesel engines operate. If you need help with any technical issue regarding your Volvo Penta MD2010-D, please call us.
The heat exchanger on any MD2010D should be cleaned every 5 years to prevent overheating. The MD2010-D should run on Volvo green coolant. Mixing VCS yellow and green coolant can cause gelling and blockages within the cooling system.
The other part to check is the exhaust elbow. As a guide, the exhaust elbow, 861906, should be removed every few years, checked for blockages, and replaced every 8 to 10 years, as the outer water jacket of the exhaust can build up with rust and corrosion.
All prices in the UK include VAT
Volvo Penta 85mm black Tacho with hour meter for all types of diesel that do not have an MDI electronic unit, nor an EVC start button panel.
All prices in the UK include VAT
Volvo Penta 3581078 is a replacement fuel water separator filter, installed between the fuel tank and engine, and known as a CAV filter. The filter housing this filter fits is either part number 877766 or 877767 or any other CAV type, filter housing.
All prices in the UK include VAT
Volvo Penta 19mm anti syphon, vacuum valve for vessels with an engine installation at or below the waterline.