Volvo Penta MS25S Saildrive Parts

All prices in the UK include VAT

This is a drain plug O-ring for the 290-DP, DP-E other DP drives listed below. This is the larger option for an MS25S and some 120S-E Saildrives whereas the other option, part number 3855081 is a much smaller O-ring measuring about 6-7mm.

All prices in the UK include VAT

This is a Saildrive/ Sterndrive drain plug O-ring and an oil filler O-ring on a DP-G sterndrive.

All prices in the UK include VAT

Folding hub screw used on a 2 blade folding hub mounted on a shaft. Two are required.

All prices in the UK include VAT

Hub bolt for Volvo Penta 2, 3 and 4 bladed folding bronze hubs fitted to a Saildrive.

All prices in the UK include VAT

Folding hub hex screw used on a 3 or 4 blade folding hub mounted on a Saildrive or shaft. Three or four are required dependant on the number of blades present.

All prices in the UK include VAT

Gearbox filler cap O-Ring for S120-C, 120S-D, 120S-E, MS2, MS2-A, MS2B, MS2L, MS2V

All prices in the UK include VAT

This is a genuine tab lock washer for all Volvo Penta folding propellers on a Saildrive hub kit. Volvo Penta Part Number 3851994. This is the lock washer where the tabs are bent to secure the hub bolt.

All prices in the UK include VAT

828250 propeller shaft grease is used for rubber stuffing boxes and dripless lip seals.

All prices in the UK include VAT

These are the 2 O-rings that sit behind the prop and protect the gearbox from water ingress. Two are required.

All prices in the UK include VAT

Saildrive cone bolt for new style plastic cone that does not use a white plastic spacer washer nor a tab washer.

All prices in the UK include VAT

Volvo Penta Saildrive and Outdrive cone plastic washer

All prices in the UK include VAT

Saildrive cone bolt for new style plastic cone that uses a tab washer but does not use a white plastic spacer washer.

All prices in the UK include VAT

Propeller Shaft Grease 25-gram, twin pack for all marine use.

All prices in the UK include VAT

This tab washer is used on some 2 and 3 blade fixed propeller cones using a tab washer. Volvo Penta Part Number: 23680979. This is the lock washer where the tabs are bent to secure the hub bolt.

All prices in the UK include VAT

Volvo Penta VDS-4.5 SAE 15W-40 diesel engine oil, 1 litre. The high quality of VDS-4.5 oils allows in certain cases an increase in drain intervals. VDS 4.5 can be mixed with VDS-3.

All prices in the UK include VAT

Folding hub hex screw used on 2 blade folding hubs. Two are required.

All prices in the UK include VAT

This is the Saildrive drain plug. The washer is part number 3855081

All prices in the UK include VAT

This is the magnetic Saildrive or Sterndrive drain plug. The washer for this drain plug is part number 3855081.

All prices in the UK include VAT

This is a one-piece ring Aluminium anode for a 120S, 120S-E and MS25S Saildrive.

All prices in the UK include VAT

Volvo Penta Magnesium Ring Anode for 120S and MS25S Saildrive.

All prices in the UK include VAT

Saildrive prop shaft sealing rings that sit behind the prop and protects the gearbox from water ingression. Two are required.

All prices in the UK include VAT

This is a replacement genuine Saildrive drain plug on some MS25S and 120S-E Saildrives.

All prices in the UK include VAT

The hub anode needs to be changed every year to protect the folding propeller from corrosion, especially if the yacht is kept in a marina.

All prices in the UK include VAT

Saildrive shaft spacer. This is the spacer used behind the propeller on some of the following Saildrives: 130, 150, 120 S-A, 120 S-B, 120 S-D, 120 S-E, MS25 S-A, MS25 SR-A. The other option is the fish line cutter, part number 851984

All prices in the UK include VAT

This three-segment folding hub anode should be checked regularly to ensure the propeller is protected from corrosion.

All prices in the UK include VAT

Magnesium Anode set for a 4 bladed folding prop fitted to a Saildrive or Shaft

All prices in the UK include VAT

HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 2-bladed prop. This is required to install a HydroAxe to a 120 or MS25 Saildrive when used in conjunction with a 2-bladed prop.

All prices in the UK include VAT

HydroAxe centre nut for a Volvo Penta 120 or MS25 Saildrive using a 3-bladed prop. This is required to install a HydroAxe to a 120 or MS25 Saildrive when used in conjunction with a 3-bladed prop.

All prices in the UK include VAT

The 3 part folding hub anode 3858400 should be checked regularly to ensure the propeller is protected from corrosion.

All prices in the UK include VAT

Volvo Penta genuine Aluminium anode for 120S and MS25S Saildrive fitted with an Ambassador rope cutter.

All prices in the UK include VAT

Volvo Penta VDS 4.5 diesel engine oil is suitable for all Volvo Penta diesel engines and some gearboxes and Saildrives - see the download section for more details. VDS 4.5 can be mixed with VDS-3.

All prices in the UK include VAT

Genuine Saildrive hub nut for Volvo Penta 2, 3 and 4 bladed folding propeller hubs as shown as item 4 on the picture, for a Saildrive

All prices in the UK include VAT

Volvo Penta 2 part Aluminium ring anode for a 130S and 150S and some MS25S Saildrives.

All prices in the UK include VAT

The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 or MSD25 Volvo Penta Saildrive.

All prices in the UK include VAT

HydroAxe replacement Zinc Saildrive rope cutter anode for a Volvo Penta 120 or MS25S Saildrive.

All prices in the UK include VAT

Magnesium ring anode for 130S and 150S Saildrive.

All prices in the UK include VAT

Genuine Volvo Penta Aluminium cut anode for the 130S and 150S Saildrive fitted with an Ambassador stripper rope cutter.

All prices in the UK include VAT

Genuine 2 and 3 bladed fixed propeller cone kit for a Volvo Penta Saildrive using a new style (current) fixed prop that doesn't now use a plastic washer. This kit contains the cone and bolt for the current style propeller. You cannot use an old-style cone that uses a plastic washer with the current propeller design.

All prices in the UK include VAT

Saildrive exterior hull cover plate bellow for Volvo Penta and Yanmar Saildrives

All prices in the UK include VAT

Volvo Penta Bearing Carrier, Part Number 873127. Ensuring you order the correct Saildrive bearing carrier for your Saildrive can be complicated. Please call us before ordering, with a serial number if possible. This can be found by the dipstick, on top of the Saildrive.

All prices in the UK include VAT

Volvo Penta Bearing Carrier, Part Number 23040713. Selecting the correct bearing carrier can be difficult on any Saildrive. Please call us if you are unsure which Saildrive bearing carrier you require. The serial number, located next to the dipstick is always helpful.

All prices in the UK include VAT

Saildrive rubber diaphragm seal kit for 110S, 120S, 130S, 150S and MS25S Saildrive. Volvo Penta recommends that replacement of the Saildrive diaphragm seal is carried out every seven years as a minimum.

All prices in the UK include VAT

Volvo Penta Clamping Ring for 110S, 120S, 130S, 150S and MS25S Saildrive. This is the Saildrive clamping ring above the diaphragm.

All prices in the UK include VAT

The HydroAxe 2-blade rope cutter for the 120 or MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.

All prices in the UK include VAT

The HydroAxe 3-blade rope cutter for the 120 and MS25 Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 120 and MS25 Volvo Penta Saildrive.