Volvo Penta

All prices in the UK include VAT

Volvo Penta 4 blade 35 mm folding propeller hub kit using a shaft of 35mm, with a taper 1:10, and a key wedge of 10mm.

All prices in the UK include VAT

Volvo Penta 4 blade 30 mm folding propeller hub kit using a 30mm shaft, a taper of 1:10, and keyway wedge of 8mm.

All prices in the UK include VAT

Volvo Penta 4 blade 25 mm folding propeller hub kit using a shaft of 25mm, a taper 1:10 and a key wedge of 6mm.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller hub kit for 1/2", with a taper 1:16 and a key wedge of 3/8".

All prices in the UK include VAT

Volvo Penta 4 blade 1 1/4" folding propeller hub kit for 1.25" shaft, with a taper of 1:16 and a key wedge of 5/16"

All prices in the UK include VAT

Volvo Penta Cone Anode for 35mm propeller shaft using a 7/8 UNC imperial threaded shaft

All prices in the UK include VAT

Volvo Penta 3581078 is a replacement fuel water separator filter, installed between the fuel tank and engine, and known as a CAV filter. The filter housing this filter fits is either part number 877766 or 877767 or any other CAV type, filter housing.

All prices in the UK include VAT

Volvo Penta Cone Anode for 35 and 40mm propeller shaft using an M24 thread

All prices in the UK include VAT

Volvo Penta Cone Anode for 30mm propeller shaft using a 3/4inch UNC thread. Imperial thread for older prop shafts

All prices in the UK include VAT

Volvo Penta shaft anode. This is for a 30mm shaft using an M20 nut.

All prices in the UK include VAT

This is a full installation kit for the Volvo Penta 300mm long interceptor or BTS. (Boat trim system)

All prices in the UK include VAT

This is a 3.5" ID (internal diameter) exhaust hose bellows used on sterndrive varients. The jubilee clips are not included.

All prices in the UK include VAT

The 3 part folding hub anode 3858400 should be checked regularly to ensure the propeller is protected from corrosion.

All prices in the UK include VAT

This three-segment folding hub anode should be checked regularly to ensure the propeller is protected from corrosion.

All prices in the UK include VAT

Volvo Penta stop cable, 3.3 metres long

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller hub kit that is pre-drilled to 8mm to allow finishing to your required taper and keyway.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller hub kit for a 25mm shaft. The shaft requires a taper of 1:10 and a keyway of 6mm.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller Saildrive hub kit for MS25S, 110S, 120S, 130S, 150S. Each kit includes Zinc anodes, locking fluid and all installation hardware

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 19 x 16 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 19 x 16 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 16 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 16 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 15 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 15 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 14 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 14 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 13 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 13 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 12 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 18 x 12 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 17 x 12 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 17 x 12 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 17 x 11 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 17 x 11 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 16 x 11 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 16x 11 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 16 x 10 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 16 x 10 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 15 x 9 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 15 x 10 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 15 x 10 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 14 x 9 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 14 x 9 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 14 x 8 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 14 x 7 with right-hand rotation usually fitted to a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller blade kit, 15 x 9 with left-hand rotation usually fitted to a Saildrive. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

This is the shaft that connects the folding blade to the hub on the latest style 3-blade folding propeller.

All prices in the UK include VAT

A new design 3 blade Saildrive propeller, part number 23478963. This is a 14 X 12, fixed 3-blade Saildrive propeller that has improved rubber bushing and corrosion protection.