Volvo Penta

All prices in the UK include VAT

828250 propeller shaft grease is used for rubber stuffing boxes and dripless lip seals.

All prices in the UK include VAT

Genuine Volvo Penta exhaust elbow 861906 for compact D1-13, D1-20, D1-30, D2-40 and MD2010, MD2020, MD2030 and MD2040 engines.

All prices in the UK include VAT

These are the 2 O-rings that sit behind the prop and protect the gearbox from water ingress. Two are required.

All prices in the UK include VAT

Folding hub hex screw used on 2 blade folding hubs. Two are required.

All prices in the UK include VAT

Volvo Penta 10-micron fuel filter inserts twin pack for the Volvo Penta fuel and water separator. This insert is 78 mm by 70 mm high and may have "Racor 2010TM" on the top to help identify it.

All prices in the UK include VAT

Genuine Volvo Penta Aluminium cut anode for the 130S and 150S Saildrive fitted with an Ambassador stripper rope cutter.

All prices in the UK include VAT

Volvo Penta 16mm anti syphon, vacuum valve for vessels with an engine installation at or below the waterline.

All prices in the UK include VAT

Volvo Penta 19mm anti syphon, vacuum valve for vessels with an engine installation at or below the waterline.

All prices in the UK include VAT

Genuine 2 bladed, folding propeller hub kit for a shaft of 1 1/4", a taper of 1:16 and keyway wedge of 5/16".

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller hub kit for a shaft of 1", with a cone ratio 1:16 and a keyway wedge of 1/4".

All prices in the UK include VAT

Volvo Penta 2 blade 25mm folding propeller hub kit for a shaft of 25 mm, a taper of 1:10 and a keyway wedge of 6 mm.

All prices in the UK include VAT

Volvo Penta 2 blade 30mm folding propeller hub kit for a shaft of 30 mm, a taper of 1:10 and a keyway wedge of 8mm.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 14 x 7 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 14 x 8 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 15 x 8 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 16 x 10 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 16 x 11 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 17 x 11 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 17 x 12 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 18 x 12 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 19 x 13 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller kit, size 15 x 10 pitch, with right-hand rotation, normally used on a shaft. For a complete propeller, a hub kit is also required.

All prices in the UK include VAT

Volvo Penta 2 blade folding propeller Saildrive hub kit for MS25S, 110S, 120S, 130S, 150S. This hub kit fits all Saildrives and comes with all the installation hardware needed including the locking bolt and tab washer.

All prices in the UK include VAT

Folding hub hex screw used on older style 2 blade folding hubs from the 1980's and 1990's. Two are required.

All prices in the UK include VAT

Pre-drilled Volvo Penta 2 blade folding propeller hub kit. This hub requires final drilling for a non-standard shaft and taper. Ths hub can be altered to fit a non-standard shaft.

All prices in the UK include VAT

Volvo Penta 2 Part Aluminium Anode set for a later production 2 bladed folding propeller hub fitted to a shaft.

All prices in the UK include VAT

Folding hub screw used on a 2 blade folding hub mounted on a shaft. Two are required.

All prices in the UK include VAT

This is the seawater impeller pump rear O-Ring for the 2001, 2002 and 2003 versions listed below.

All prices in the UK include VAT

This is the exhaust elbow or water injection elbow gasket for a 2001, 2002, 2003 or 2003T turbo, MD7, MD6.

All prices in the UK include VAT

This is a complete gasket set for decarbonizing a Penta 2001, commonly referred to as a decoke gasket set. It contains both the head gasket and manifold gasket, various O-rings and seals plus all other gaskets

All prices in the UK include VAT

This is the exhaust elbow or water injection elbow for a Volvo Penta 2001, 2002, 2003

All prices in the UK include VAT

This is a replacement fuel feed pipe used when replacing an old non-sealed type lift pump (for the new sealed type) for a Volvo Penta 2001,2002, and 2003. Early lift pumps were non-sealed (able to be split apart). This pipe is required when changing from a non-sealed to a new style sealed lift pump.

All prices in the UK include VAT

This is the sealed type fuel lift pump for later varients of the Volvo Penta 2001, 2002 and 2003.

All prices in the UK include VAT

This is the seawater impeller pump for the 2001, 2002 and 2003 versions listed below. Please note that we can rebuild and service these pumps, plus shaft and wear kits are available as well

All prices in the UK include VAT

This is a complete gasket set for decarbonizing a Penta 2002, commonly referred to as a decoke gasket set. It contains both the head gasket and manifold gasket, various O-rings and seals plus all other gaskets necessary

All prices in the UK include VAT

This is a complete gasket set for decarbonizing a 2003 and 2003T commonly referred to as a decoke gasket set

All prices in the UK include VAT

This is the Penta 2003T Air Intake Muffler for the 2003T and 2003TB Volvo Penta engines

All prices in the UK include VAT

This is the exhaust elbow or water injection elbow gasket for a 2001, 2002, 2003 or 2003T turbo

All prices in the UK include VAT

This is the exhaust elbow or water injection elbow for a 2003T turbo version.

All prices in the UK include VAT

Volvo Penta 10-micron fuel filter insert for the larger Volvo Penta fuel and water separator that uses 2040 inserts. This insert may have 2040TM on the top to help identify it. The dimensions of the filter are 11.7 cm high x 11 cm wide.

All prices in the UK include VAT

Volvo Penta 22mm anti syphon, vacuum valve for vessels with an engine installation at or below the waterline.

All prices in the UK include VAT

Volvo Penta 25mm anti syphon, vacuum valve for vessels with an engine installation at or below the waterline.

All prices in the UK include VAT

Volvo Penta Zinc cone anode for a 25mm propeller shaft (M16)

All prices in the UK include VAT

Sterndrive exhaust bellow kit for a 270-SP and 280-SP Sterndrive. These kits include the Jubilee clips. Exhaust bellows should be inspected regularly and changed every 1-2 years.

All prices in the UK include VAT

Sterndrive exhaust bellow kit for 280, 290, DP-E and other Sterndrives. These kits include the Jubilee clips. Exhaust bellows should be inspected regularly and changed every 1-2 years.

All prices in the UK include VAT

Volvo Penta DPH, DPI, DP-R Hook-up fork bush.

All prices in the UK include VAT

Folding hub hex screw used on a 3 or 4 blade folding hub mounted on a Saildrive or shaft. Three or four are required dependant on the number of blades present.

All prices in the UK include VAT

Volvo Penta 3 blade folding propeller hub kit for a 1 1/4" (1.25") shaft with a taper of 1:16 and 5/16" keyway wedge.