Yacht and Motorboat Marine Anodes
We stock a vast range of yacht and motorboat anodes. The range includes all Volvo Penta Saildrive anodes, folding prop hub anodes, Volvo Penta shaft cone anodes, Sterndrive and heat exchanger/engine pencil anodes and D4, D6 exhaust anodes.
Volvo Penta anodes are made to exact specifications to protect your drive from corrosion. we do not recommend that aftermarket anodes are used, as they may offer reduced protection from damaging the underwater gear.
We also stock trim tab anodes and pear anodes in different weights, plus pear anode bolts.
Zinc anodes are designed for saltwater use. A Magnesium version should be used for freshwater. In brackish water, an Aluminium version should be used. Anodes should not be mixed on any installation and should be inspected as often as possible, especially if the boat is in a marine environment with lots of shore power around. If the anode is worn by more than a third, it will need to be changed, due to its surface area being reduced.
We also stock Tecnoseal trim tab and pear anodes including R1, R2 and R3 trim tab anodes.
If you are unsure as to the exact anode you require, please call us before ordering on 01326 370060.
Volvo Penta Brass Anode Plug For Diesel Engines, Part Number 838928
£19.98
All prices in the UK include VAT
Volvo Penta Brass Anode Plug for all 2000, D series, KAD, TMD and TAMD engines. This is the brass anode holder threaded plug that holds the anode in place.
Tecnoseal R3, Zinc 92mm twin disc trim tab or rudder anode set, Part Number R3
£19.95
All prices in the UK include VAT
Tecnoseal R3, 92mm dia x (2 x 13mm thick) Zinc twin low profile disc anode complete with ST-ST bolt for a rudder or trim tabs.
Tecnoseal Zinc rudder or hull anode 110 x 80, Part Number 00102UK
£18.50
All prices in the UK include VAT
This is a 80 x 100mm disc rudder or hull anode with a cut out insert.
Tecnoseal Aluminium rudder or hull anode 110 x 80, Part Number 00102UKAL
£18.50
All prices in the UK include VAT
This is a 80 x 100mm disc rudder or hull anode with a cut out insert.
Tecnoseal Aluminium, 92 mm twin disc trim tab or rudder anode set, Part Number R3AL
£16.95
All prices in the UK include VAT
Tecnoseal R3AL 92 mm dia x (2 x 13mm thick) Aluminium twin low profile disc anode complete with ST-ST bolt for a rudder or trim tabs.
Beneteau Type 40mm Zinc propellor cone anode, Part Number 403
£14.90
All prices in the UK include VAT
Beneteau Type 40mm Zinc propellor cone anode. This anode is supplied with a replacement stainless bolt.
Tecnoseal R2, 72mm Zinc twin disc trim tab anode set, Part Number R2
£13.50
All prices in the UK include VAT
Tecnoseal R1, 72 mm dia x (2 x 11mm thick) Zinc twin low profile disc anode set complete with ST-ST bolt for rudder or trim tabs.
Volvo Penta 280 DP, 290 DP propeller removal tool, Part Number 885127
£12.00
All prices in the UK include VAT
Volvo Penta 280 DP, 290 DP Sterndrive Duoprop propeller removal tool, Part Number 885127
Volvo Penta DPH, DPI and DPR propeller removal tool, Part Number 23161623
£11.88
All prices in the UK include VAT
DPH, DPI and DPR inner prop removal tool for all DP-H and DPR outdrives, including DPH, DPH-A, DPH-B, DPH-C, DPH-D, DPH-D1, DPH-BP, DPR, DPI-A
Volvo Penta Zinc engine anode, Part Number 838929
£11.56
All prices in the UK include VAT
Volvo Penta Zinc pencil Anode for D4, D6, 2001, 2002, 2003 raw water diesel, some D series, TMD and TAMD engines.
Beneteau Type 35mm Zinc propellor cone anode,Part Number 402
£11.00
All prices in the UK include VAT
Beneteau Type 35mm Zinc propellor cone anode. This anode is supplied with a replacement stainless bolt.
Beneteau 30mm Zinc propellor cone anode, Part Number 401
£8.80
All prices in the UK include VAT
Beneteau Type 30mm Zinc propellor cone anode. This anode is supplied with a replacement stainless bolt.