Volvo Penta

All prices in the UK include VAT

This is a 3.5" ID (internal diameter) exhaust hose bellows used on sterndrive varients. The jubilee clips are not included.

All prices in the UK include VAT

Volvo Penta shaft anode. This is for a 30mm shaft using an M20 nut.

All prices in the UK include VAT

Volvo Penta Cone Anode for 30mm propeller shaft using a 3/4inch UNC thread. Imperial thread for older prop shafts

All prices in the UK include VAT

Volvo Penta Cone Anode for 35 and 40mm propeller shaft using an M24 thread

All prices in the UK include VAT

Volvo Penta 3581078 is a replacement fuel water separator filter, installed between the fuel tank and engine, and known as a CAV filter. The filter housing this filter fits is either part number 877766 or 877767 or any other CAV type, filter housing.

All prices in the UK include VAT

Volvo Penta Cone Anode for 35mm propeller shaft using a 7/8 UNC imperial threaded shaft

All prices in the UK include VAT

Volvo Penta 4 blade 1 1/4" folding propeller hub kit for 1.25" shaft, with a taper of 1:16 and a key wedge of 5/16"

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller hub kit for 1/2", with a taper 1:16 and a key wedge of 3/8".

All prices in the UK include VAT

Volvo Penta 4 blade 25 mm folding propeller hub kit using a shaft of 25mm, a taper 1:10 and a key wedge of 6mm.

All prices in the UK include VAT

Volvo Penta 4 blade 30 mm folding propeller hub kit using a 30mm shaft, a taper of 1:10, and keyway wedge of 8mm.

All prices in the UK include VAT

Volvo Penta 4 blade 35 mm folding propeller hub kit using a shaft of 35mm, with a taper 1:10, and a key wedge of 10mm.

All prices in the UK include VAT

Volvo Penta 4 blade 40 mm folding propeller hub kit using a 40mm shaft, a taper of 1:10, and a key wedge of 12mm.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 20 x 14, with left-hand rotation usually used on a Saildrive. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 20 x 14, with right-hand rotation usually used on a shaft. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 21 x 15, with right-hand rotation usually used on a shaft. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 21 x 15, with left-hand rotation usually used on a Saildrive. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 22 x 16, with left-hand rotation usually used on a Saildrive. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 22 x 16, with right-hand rotation usually used on a shaft. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 22 x 18, with left-hand rotation usually used on a Saildrive. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 22 x 18, with right-hand rotation usually used on a shaft. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 22 x 20, with right-hand rotation usually used on a shaft. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller blade kit, 22 x 20, with left-hand rotation usually used on a Saildrive. To complete a propeller, a 4 blade hub kit is required.

All prices in the UK include VAT

Volvo Penta 4 blade folding propeller hub kit for all Saildrives including MS25S, 110S, 120S, 130S, 150S. Each kit includes Zinc anodes, locking fluid and all the installation hardware required.

All prices in the UK include VAT

This is a 4" ID (internal diameter) exhaust hose bellows used on sterndrive varients.

All prices in the UK include VAT

Volvo Penta Cone Anode for 40 and 45mm, 1-3/8" propeller shafts (1" thread)

All prices in the UK include VAT

This is a 418445 sealing ring used on the exhaust elbow water feed from the thermostat on 2001, 2002, 2003 and 2003T diesel engines and for other engines including KAD diesel engines.

All prices in the UK include VAT

Volvo Penta Cone Anode for 45mm propeller shaft using an M30 metric thread on the end of the shaft.

All prices in the UK include VAT

Volvo Penta Bowden stop cable. This is a 6.9m stop cable for stopping a diesel before switching off the button panel. We also sell a 3.3m cable if required.

All prices in the UK include VAT

Volvo Penta 85mm black Tacho with hour meter for all types of diesel that do not have an MDI electronic unit, nor an EVC start button panel.

All prices in the UK include VAT

The QL Active Corrosion Protection System helps prevent galvanic corrosion from attacking the metal parts of your sterndrive or outboard

All prices in the UK include VAT

This is the seawater impeller pump with push on connectors for the early AD31, AD41 models

All prices in the UK include VAT

Aftercooler O-ring for D2-60F, D2-75, D2-75B, D2-75C, D2-75F. Four O-rings are required. These aftercooler o-rings should be changed at least every 5 years to ensure no corrosion takes place in the aftercooler.

All prices in the UK include VAT

Volvo Penta spring MD2010, MD2020, MD2030, MD2040, D2-50, D2-55, D2-60 and D2-75 spring for the air filter. This spring prevents the sponge air filter from being sucked up the intake on the Volvo engines listed below.

All prices in the UK include VAT

Volvo Penta MD2010, MD2020, MD2030, MD2040, D2-50, D2-55, D2-60 and D2-75 Air Filter. This is a service item for the above Volvo Penta engines.

All prices in the UK include VAT

Alternator belt for freshwater cooled 2002, 2003, 2003T engines. Also fits MD1, MD2, and MD11 diesel engines. This belt is also used on some petrol variants. 900mm long.

All prices in the UK include VAT

Genuine Volvo Penta Alternator Belt for KAD32, KAD42, KAD43, KAD44 and KAD300 series diesel engines.

All prices in the UK include VAT

Volvo Penta Alternator V Belt for some V6 and V8 petrol engines. If you are not sure which belt you require, please contact us

All prices in the UK include VAT

Volvo Penta Alternator V Belt for some V8 petrol engines. If you are not sure which belt you require, please contact us

All prices in the UK include VAT

Volvo Penta alternator for some D6 and D4 engines, Part Number 24110417

All prices in the UK include VAT

Genuine Volvo Penta Alternator for KAD32, KAD42, KAD43, MD2010, MD2020, MD2030, MD2040, 2001, 2002, 2003 and other engines

All prices in the UK include VAT

Volvo Penta genuine Aluminium anode for 120S and MS25S Saildrive fitted with an Ambassador rope cutter.

All prices in the UK include VAT

This is a one-piece ring Aluminium anode for a 120S, 120S-E and MS25S Saildrive.

All prices in the UK include VAT

The hub anode needs to be changed every year to protect the folding propeller from corrosion, especially if the yacht is kept in a marina.

All prices in the UK include VAT

Volvo Penta Aluminium bar anode for DPX transom shield including DPX, DPX-C, DPX-R, DPX-S, DPX-A

All prices in the UK include VAT

Genuine Volvo Penta Aluminium SX and DP-SM cavitation anode.

All prices in the UK include VAT

Aluminium cavitation plate anode for DPH DPR and DPI-A Sterndrives.

All prices in the UK include VAT

Aluminium cavitation plate anode for DPI-A Sterndrives

All prices in the UK include VAT

Volvo Penta Aluminium cavitation plate anode for SX from 2007 onwards and DPS Outdrives.