Technical specification: TAMD series diesel range. Manufactured from 1986 to 1995. In line 6-cylinder, 306 hp. Oil capacity approximately 20 litres of VDS3 oil dependant on inclination.
The Volvo Penta TAMD61, TAMD61A is an in-line 6-cylinder, fresh water cooled diesel engine.
We can supply all parts for the Volvo Penta TAMD61 range including the range of TAMD61 series spare parts, oil filters and fuel filters, crank case breathers, drive belts and impellers, genuine TAMD61 series exhaust elbows, oils and grease. We are also main Volvo Penta dealers for servicing and technical support.
Volvo Penta TAMD61 genuine service parts are made to exacting standards to withstand the harsh salt water environment in which marine diesel engines operate. If you need helps with any technical issue regarding your Volvo Penta TAMD61, please call us.
The heat exchanger and air cooler on any TAMD61 should be cleaned and all the "O" rings changed, every 5 years to prevent overheating.
TAMD61 diesels should run on Volvo green coolant. Please do not mix or change the coolant type once one has been used. If you are running on Volvo Penta green coolant, continue to use green coolant. Do not use VCS yellow coolant as it can cause it to gel and blockages occur within the cooling system.
Volvo Penta 10-micron fuel filter insert for the Racor 500 GPH and Volvo Penta fuel and water separator, part number 877762 for larger yacht and motorboat engines
This genuine oil filter, 21549542 is used on TAMD and some MD ranges including the MD21A, MD21B MD29, M29-A, and MD32A
Volvo Penta Crankcase Breather Filter used on several Volvo Penta diesel engines manufactured especially to withstand a saltwater environment.
Volvo Penta Brass Anode Plug for all 2000, D series, KAD, TMD and TAMD engines. This is the brass anode holder threaded plug that holds the anode in place.