Volvo Penta 130S Saildrive Parts
We support the Volvo Penta 130S Saildrives with genuine spare parts, Volvo anodes, oil, and seals plus Saildrive paint to protect the 130S Saildrive from corrosion. Always fit genuine anodes to your 130S Saildrive to protect it from corrosion. Volvo Penta 130S anodes are made to exact specifications to protect the Saildrive.
Aluminium anodes should be used in brackish or saltwater use. A Magnesium version should be used for freshwater. Anodes should not be mixed on any installation and should be inspected as often as possible, especially if the boat is in a marina environment with shore power around. If the anode is worn by more than a third, it will need to be changed, due to its surface area being reduced.
Most 130S Saildrives use VDS 4.5 engine oil. We also supply Volvo Penta 130S Saildrive fixed and folding propellers and the HydroAxe rope cutter which requires no propeller alteration. We can also help you with sizing a replacement propeller if required.
Click here for details on the HydroAxe rotating rope cutter for 130 and 150 Saildrives.
Oil capacity: Approximately 3.3 litres of VDS 4.5 oil.
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 2-bladed prop
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 2-bladed prop. This is required to install a HydroAxe to a 130 or 150 Saildrive when used in conjunction with a 2-bladed prop.
£54.00
All prices in the UK include VAT
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 2-bladed prop. This is required to install a HydroAxe to a 130 or 150 Saildrive when used in conjunction with a 2-bladed prop.
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 3-bladed prop
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 3-bladed prop. This is required to install a HydroAxe to a 130 or 150 Saildrive when used in conjunction with a 3-bladed prop.
£54.00
All prices in the UK include VAT
HydroAxe centre nut for a Volvo Penta 130 or 150 Saildrive using a 3-bladed prop. This is required to install a HydroAxe to a 130 or 150 Saildrive when used in conjunction with a 3-bladed prop.
HydroAxe replacement aluminium anode for a Volvo Penta 130 or 150 Saildrive
HydroAxe replacement aluminium anode for a Volvo Penta 130 or 150 Saildrive.
£70.00
All prices in the UK include VAT
HydroAxe replacement aluminium anode for a Volvo Penta 130 or 150 Saildrive.
HydroAxe replacement Zinc anode for a Volvo Penta 130 or 150 Saildrive
HydroAxe replacement Zinc anode for a Volvo Penta 130 or 150 Saildrive.
£70.00
All prices in the UK include VAT
HydroAxe replacement Zinc anode for a Volvo Penta 130 or 150 Saildrive.
HydroAxe rope cutter for a Volvo Penta 130 or 150 Saildrive using a 2-bladed propeller
The HydroAxe 2-blade rope cutter for the 130/ 150S Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
£776.40
All prices in the UK include VAT
The HydroAxe 2-blade rope cutter for the 130/ 150S Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
HydroAxe rope cutter for a Volvo Penta 130 or 150 Saildrive using a 3-bladed prop
The HydroAxe 3-blade rope cutter for the 130/ 150S Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
£836.40
All prices in the UK include VAT
The HydroAxe 3-blade rope cutter for the 130/ 150S Saildrive requires no alteration or machining to the fixed or folding propeller before fitting it to your 130 or 150 Volvo Penta Saildrive.
Saildrive 130 150 bearing housing O-ring, Part Number 889672
These are the 2 O-rings that sit behind the prop and protect the gearbox from water ingress. Two are required.
£2.38
All prices in the UK include VAT
These are the 2 O-rings that sit behind the prop and protect the gearbox from water ingress. Two are required.
Saildrive Lower Gear Unit Service kit, Part Number SD130150
130S, 150S lower Saildrive shaft service kit to include the 2 shaft seals in the bearing carrier and the 2 bearing carrier O-rings, that protect the gearbox from water ingression. This kit also includes a genuine replacement drain plug and a new drain plug o-ring.
£100.06
All prices in the UK include VAT
130S, 150S lower Saildrive shaft service kit to include the 2 shaft seals in the bearing carrier and the 2 bearing carrier O-rings, that protect the gearbox from water ingression. This kit also includes a genuine replacement drain plug and a new drain plug o-ring.
Saildrive prop shaft sealing ring, Part Number 3593663
Saildrive prop shaft sealing rings that sit behind the prop and protects the gearbox from water ingression. Two are required.
£38.56
All prices in the UK include VAT
Saildrive prop shaft sealing rings that sit behind the prop and protects the gearbox from water ingression. Two are required.
Volvo Penta 2 blade folding hub hex screw, Part Number 3595221
Folding hub hex screw used on 2 blade folding hubs. Two are required.
£19.55
All prices in the UK include VAT
Folding hub hex screw used on 2 blade folding hubs. Two are required.
Volvo Penta 130S and 150S Aluminium Saildrive Anode for Ambassador Rope Cutter, Part Number 23615636C
Genuine Volvo Penta Aluminium cut anode for the 130S and 150S Saildrive fitted with an Ambassador stripper rope cutter.
£90.00
All prices in the UK include VAT
Genuine Volvo Penta Aluminium cut anode for the 130S and 150S Saildrive fitted with an Ambassador stripper rope cutter.
Volvo Penta 2, 3 and 4 blade folding hub screw, Part Number 3581246
Folding hub screw used on a 2 blade folding hub mounted on a shaft. Two are required.
£2.05
All prices in the UK include VAT
Folding hub screw used on a 2 blade folding hub mounted on a shaft. Two are required.