Technical Specification: KAD43A, KAD43P-A, Six-cylinder diesel, rated at 230 hp. Years of manufacture: 1997 - 2005. The oil capacity of KAD43 is approximately 11 litres. Compressor oil is 0.1 litre
The Volvo Penta KAD43 range was made between 1997 and 2005. All the KAD range is supercharged and turbocharged.
We can supply all parts for the Volvo Penta KAD43A, KAD43P-A range of diesel engines, including KAD43 series spare parts, oil filters and fuel filters, crankcase breathers, drive belts and impellers, genuine KAD43 series exhaust elbows, oils and grease. We are also main Volvo Penta dealers for servicing and technical support.
Volvo Penta KAD43A, KAD43P-A genuine service parts are made to exacting standards to withstand the harsh saltwater environment in which marine diesel engines operate. If you need helps with any technical issue regarding your Volvo Penta KAD43 please call us.
The heat exchanger and oil cooler on any KAD43 should be cleaned and the "O" rings changed, every 5 years to prevent overheating. KAD43 diesels should be using Volvo green coolant. Never attempt to try and change over to Volvo Penta VCS yellow coolant. Mixing yellow and green coolant can cause gelling and blockages within the cooling system.
This kit contains the oil filter and fuel filter, as well as the impeller and all necessary gaskets.
Volvo Penta 10-micron fuel filter insert for the Racor 500 GPH and Volvo Penta fuel and water separator, part number 877762 for larger yacht and motorboat engines
Impeller for some D4, AD, AQ, KAD, KAMD, MD, TAMD and TMD series diesel engines - see below for details
Impeller removal tool for Impeller 21951356, used on some D4, KAD and other diesel engines
This is an air filter and service item for the KAD32, KAD42, KAD43, KAD44, KAD300, TAMD61, TAMD62, TAMD71 and TAMD72 Volvo Penta diesel engines
Volvo Penta Brass Anode Plug for all 2000, D series, KAD, TMD and TAMD engines. This is the brass anode holder threaded plug that holds the anode in place.