Technical Specification: D6 300 A-F. 5.5 litre, in-line 6-cylinder, 300 hp to 400 hp. Oil capacity approximately 20 litres of VDS3 oil. Coolant capacity is approximately 17 litres.
The Volvo Penta D6-300 is an in-line 6-cylinder, 5.5-litre diesel engine with common-rail fuel injection, double-overhead camshafts and turbo. It provides high reliability, exceptional fuel efficiency and low maintenance cost.
We can supply all parts for the Volvo Penta D6 including the range of D6 series spare parts, oil filters and fuel filters, crankcase breathers, drive belts and impellers, genuine D6 series exhaust elbows, propellers, oils and grease. We are also main Volvo Penta dealers for servicing and technical support.
Volvo Penta D6 genuine service parts are made to exacting standards to withstand the harsh saltwater environment in which marine diesel engines operate. If you need helps with any technical issue regarding your Volvo Penta D6, please call us.
The heat exchanger and air cooler on any D6 should be cleaned and all the "O" rings changed, every 5 years to prevent overheating. Older D6 diesel engines may run on Volvo green coolant and newer ones may be using yellow VCS coolant. Please do not mix or change the coolant type once one or other has been used. If you are running on Volvo Penta green coolant, continue to use green coolant. Mixing yellow and green coolant can cause gelling and blockages within the cooling system.
Contains the oil filter and fuel filter, crankcase breather filter and air filter as well as the impeller and all necessary gaskets
Volvo Penta 10-micron fuel filter insert for the Volvo Penta fuel and water separator, part number 877762. This insert may have 2010TM on the top to help identify it.
Volvo Penta 10-micron fuel filter inserts twin pack for the Volvo Penta fuel and water separator, part number 877762. This insert is 78mm by 70mm high and may have 2010TM on the top to help identify it.
This crankcase breather 3584145helps to protect the operation of the D4 and D6 range of diesel engines